How to Maintenance Riveting Machines Eyeleting Machine?

Good maintenance can keep good performance of the machine and the life of spare parts

The riveting position of punches and dies should be kept always clean, cannot have lubricating oil.
Clean the flow pass each day and keep lubricating oil out
Clean the machine after the operation of the machine
Inside of Feeder bowl can’t be clean by oil or water, should be cleaned by the dry cloth
Do not overload capacity when process components
The length of rivets should be not more than the specified value.
Shut down power immediately if an emergency happens, checking around and clearing trouble before starting the machine again.
Contact us for support without hesitating if any malfunctions.

Interval	Tips	Material
Before starting every day	Check all the springs of each part
Every 8 hours	Lubricate axle center of the punch Lubricate drive shaft Lubricate fixed shaft of the clutch plate	Automotive oil
Every 48 hours	Lubricate eccentric wheel Lubricate drive shaft	Machine grease
Restart after long-term stop	Lubricate the contact place of the control bar Lubricate the contact place of feeding pole	Machine grease