How to Maintenance Riveting Machines Eyeleting Machine?

Good maintenance can keep good performance of the machine and the life of spare parts.

The riveting position of punches and dies should always be kept clean, and cannot have lubricating oil.
Clean the flow pass each day and keep lubricating the oil out
Clean the machine after the operation of the machine
The inside of feeder bowl can’t be cleaned with oil or water, it should be cleaned with the dry cloth
Do not overload capacity when process components
The length of the rivets should be not more than the specified value.
Shut down power immediately if an emergency happens, checking around and clearing trouble before starting the machine again.
Contact us for support without hesitating if any malfunctions.

Interval	Tips	Material
Before starting every day	Check all the springs of each part
Every 8 hours	Lubricate the axle center of the punch Lubricate drive shaft Lubricate the fixed shaft of the clutch plate	Automotive oil
Every 48 hours	Lubricate eccentric wheel Lubricate drive shaft	Machine grease
Restart after a long-term stop	Lubricate the contact place of the control bar Lubricate the contact place of the feeding pole	Machine grease